This page provides instructions for setting up the email client on the Sony Ericsson T637 and Versamail Client on the Treo 650.  If your phone supports email you can follow the instructions in your user's guide to set up your email.  Common issues with installation include not selecting authentication or entering correct SMTP port or server.  If you cannot send email try setting your SMTP server to Cingular's.  - See Mail Servers and Settings for additional info.

1. Look up your Incoming and Outgoing email servers by clicking here.
2. Make sure you have enabled POP3 Access from your online account (Gmail, Yahoo).
3. Select your "Messages" Setting
4. Scroll to the "Email" Option below "Text"
5. Scroll to the "Options" Menu
6. Sleet "Edit Account"
7. Select "New Account"
8. Give the account a name
9. Move through the Menu entering the information from the email settings page
   1. Connect Using - Express
   2. Protocol - POP or IMAP - See Mail Servers and Settings
   3. Incoming Sever - POP3 Or IMAP Server
   4. Incoming Port - See Mail Servers and Settings
   5. MailBox - Username of email account
   6. Password - Password of email account
   7. Outgoing Server - SMTP Server or CWMX.com
   8. Outgoing Port - See Mail Servers and Settings
   9. Email Address - username@domain.com
   10. Download -
       1. Headers & Text - will download all text from all email messages.  Uses more bandwidth because all text is downloaded.
       2. Headers Only - Only downloads To, From, Subject of the email to your phone.  Once you select the message it downloads the text.  Saves Bandwidth.
   11. From Name - Your Name
   12. Signature - Info is always left at bottom of message
   13. Check Interval - User preference, I set mine to off and check it manually to save bandwidth.
10. Click "SAVE"
11. Exit to "Email Menu and click "Send & Receive"

1. Drop the CD in or select the wizard from Start-->Programs-->Palm One-->Veramail Setup
2. Select your Hot sync Username
3. Next
4. You can choice to import settings from your computer or select an account from the drop down.  If you do not have BellSouth, Earthlink, or SBC account select Other.   Please note if you import settings from your computer and use POP it is possible your mail will only download to one device and not viewable on both.  I recommend selecting this only if you use an IMAP server or you don't mind if your email is synced on both your computer and palm. 
5. If you select other enter your Server and User information.  Make sure you have entered the proper ports and selected SMTP authentication where needed

1. Open the Versamail application
2. Press Menu key on the Treo
3. Select Accounts
4. Open Account Setup
5. Select New
6. Using the dropdown menu, select a pre-configured account or select "Other" to enter your own account info
7. Enter in your account information and password
8. Press Next
9. It will tell you basic setup is done.  However, in some cases you will need to click the "Advanced" button to enter additional information.
10. Click "Advanced"
11. Change "Incoming" Port Number if needed.  - See Mail Servers and Settings
12. Next
13. Change "Outgoing" Port if needed - See Mail Servers and Settings
14. Select "SSL" or "Authentication" if needed
15. Select Done